:::

:::

劉宏信 HH Liu

首頁 > 師資介紹 > 專任教師研究 > 劉宏信 HH Liu
 

一、研究著作資料表
A.期刊論文 (SCI or EI or SSCI):
1.H.H Liu, M.H Lin, P.C Liu, C.I Chan, H.L Chen,”Health Risk Assessment by Measuring Plasma Malondialdehyde (MDA), Urinary 8-hydroxydeoxyguanosine (8-OH-dG) and DNA Strand Breakage Following Metal Exposure in Foundry Workers”, Journal of Hazardous Materials 2009; (in press).

2.Amanda L.-C. Chen, Thomas J.H. Chen, Roger L. W, Jeffrey R, Howard L.T, Patrick R, B. William D, Lonna W, H.H. Liu, Kenneth B, et al.,”Hypothesizing that brain reward circuitry genes are genetic antecedents of pain sensitivity and critical diagnostic and pharmacogenomic treatment targets for chronic pain conditions”, Medical Hypotheses 2008; (SCI,IF=1.29). 

3.H.H Liu, T.S Shih, I.J Chen, H.L Chen,” Lipid Peroxidation and Oxidative Status Compared in Workers at a Bottom Ash Recovery Plant and Fly Ash Treatment Plants”, J Occup Health 2008; 50:492-497.
4.C. P. Chang, H. H. Liu, C. Y. Peng, H.Y Fang, T.H Tsao, and C.H Lan. Evaluation of erythemal UV effective irradiance from UV lamp exposure and the application in shield metal arc welding processing. Health Phys. 2008; 94(4):318-327.
5.C. P. Chang, H. H. Liu, C. Y. Peng, J. Y. Shieh, C. H. Lan, ”UVR Measurement of A UV Germicidal Lamp”, Health Phys,92(3):242-250(2007)(SCI,IF=1.018, rank in nucleus science and technology= 7/32 = 21% )
6.C. Y. Peng, H. H. Liu, C. P. Chang, J. Y. Shieh, C. H. Lan, ”Evaluation and Monitoring of UVR in Shield Metal Arc Welding Processing”, Health Phys,93(2):101-108(2007)
7.H. H. Liu, Y. C. Wu, H. L. Chen, “Production of Ozone and Reactive Oxygen Species (ROS) after Welding”, Arch Environ Contam Toxicol, 53,513-518(2007)(SCI, IF=1.419)
8.Y. C. Chien, H. H. Liu, Y. C. Lin, P.C. Su, L.H. Li, C.P. Chang, D.T. Tang, C.Y. Chen,” Ethylene oxide sterilization in the medical-supply manufacturing industry: Assessment and control of worker exposure”, J Biomed Mater Res Part B: Appl Biomater,83,527-537(2007)(SCI, IF=1.778 )
9.C. Y. Peng, C. H. Lan, Y. J. Juang, T. H Tsao, Y. T. Dai, H. H. Liu, C. J. Chen,”Exposure Assessment of Aluminum Arc Welding Radiation”, Health Phys, 93(4):298 –306; 2007
10.Chen, J.-L., Su, L.-F., Tsai, C.-L., Liu, H.-H. , Lin, M.-H., Tsai, P.-J.*, Mass, Number and Surface Area Concentrations of a-Quartz Exposures of Refractory Material Manufacturing Workers. Journal of Occupational Health, 2007; 49: 411-417. (SCI; Impact factor=1.848; Ranking in Pub. Environ. Occup. Health= 43/98 = 43.9%)
11.H. H. Liu, C. P. Chang, J. Y. Shieh, T. S. Su, C. H. Lan, ”Exposure Monitoring of Ultraviolet Radiation from Arc Welding Processing” , J of Occup Safety and Health”, 14:205-216(2006 Chinese)
12.Y.-J. Huang, H. Paul Wang, C. C. Chao, H. H. Liu, M. C. Hsiao and S. H. Liu, “Oxidation Kinetics of Spent Low Level Radioactive Resin”, Nucl. Sci. Eng..151,355-360(2005)
13.Shih TS, Yang SC, Chen CY, Liu HH, Huang YS, Liou SH*. Field evaluation of a passive sampler for assessing 2-ethoxy ethyl acetate exposure. J Occup Health, 46:479-485.(2004)
14.P. J. Tsai, C. C. Lu, Y. M. Sun, Y. J. Juang, H. H. Liu, W. Y. Chen and W. Y. Yeh, “Evaluating the Efficacy of a Thermal Exposure Chamber Designed for Assessing Worker’s Thermal Hazard”, J Occup Health , 45: 153-159.(2003)
15.Y. M. Sun and H. H. Liu, “Novel Copolyesters Containing Naphthalene Structure III. Copolyesters Prepared from 2,6-Dimethyl Naphthalate, Ethylene Glycol, and 2,2-Dialkyl-1,3-Propanediols”, , J. Appl. Polym. Sci., 81, 2754-2763.(2001)
16.Y. M. Sun, H. H. Liu, F. S. Juang, “Synthesis and characteristics of novel phosphorus containing light-emitting polymers”, United States Patent.(2000)
17.Y. M. Sun and H. H. Liu, “Safety process for polycarbonate-The feasibility of the non-phosgene  polycarbonate process", Journal of Technology, .Vol.16, No.1,pp85-96( 2001)
18.Y. M. Sun, H. H. Liu and Y. J. Juang, “Study on Optimum Processes for Commercialization of Engineering Plastics: Polyethylene naphthalate”, Journal of Technology, Vol. 13, No. 2, pp. 285-296.(1998)
19.B. J. Uang, S. Y. Po, S. C. Hung, H. H. Liu, C. Y. Hsu, Y. S. Lin, and J. W. Chang, “ Asymmetric Synthesis Employing Chiral Ketones as Templates”, Pure & Appl. Chem., Vol, 69, No. 3, pp. 615-6220.(1997)
20.H. H. Liu, B. J. Uang and Ty. Y. Chen, “An Efficient and Neutral Catalyst for the Ketalization of Carbonyl Compounds”, J. Chin. Chem. Soc., 39, 359-360.(1992)
21.H. H. Liu, F. N. Chen, B. J. Uang, and S. L. Wang, “Synthesis of Optically Active-Akyl Thioglycolic Acid Derivatives”, Thetrahedron Lett., 31, 257.(1990)
22.H. H. Liu, B. J. Uang, and S. L. Wang, “Stereochemical Studies of An Optically Active Bornane Derivative”, Acta Cryst., C46, 1020.(1990)
23.S. Y. Po, H. H. Liu and B. J. Uang, “Eantioselective Syhthesis of Aryl Thioglycolic Acid Derivatives”, Thetrahedron Asymmetry, 1, 143.(1990)


B.期刊論文 (非SCI or EI or SSCI):
1.劉宏信,施巧玲,顏雅琳,賴國榮 ”鋰電池工廠作業人員生理及心理疲勞狀況之評估”,華醫學報, 17, 115-126(2002)
2.孫逸民,劉宏信,張福林, ”新穎環氧樹脂之合成與純化”,華醫學報, 10, 1-21(1999)
3.劉宏信,莊侑哲,謝正悅,孫逸民, ”IC封裝用耐高溫安全材料之合成與純化”,華醫學報, 11, 69-86(1999)
4.孫逸民,劉宏信, ”耐火材料之合成與物性測試”,華醫學報, 9, 1-7(1998)
5.孫逸民,鍾美惠,劉宏信, 1997, ” 2,6-@二甲醯氯與2,6-@二苯酯的合成與鑑定” ,華醫學報, 7, 207-219(1997)


C. 研討會論文:
1.H. H. Liu, S.Y Gong, C.Y Chen, L.H Lee, C.P Chang, C.A Lin, “Simulation of the fluid field of the Sand shakeout equipment in Foundry Plant”, 2009 International Conference of Industrial Hygiene and Occupational Medicine.

2.H. H. Liu, Y.C Chien, S.Y Gong, C.Y Chen, L.H Lee, T.S Shih, “Improve on the quartz exposure of the respirable dust by change the composition of mold coating in Foundry Industry”, 2009 International Conference of Industrial Hygiene and Occupational Medicine.

 

3.Y. C. Chang ,Y. C Yiang, H. L. Chen, C. H. Lan, H. H. Liu, “Study the relationship between different welding electric current and reactive oxygen species”, 2007 International Conference of Industrial Hygiene and Occupational Medicine.
4.J.Y. Shieh, C.P. Chang, H.H. Liu, C.H. Lan, ”Exposure assessment of non-ionzing radiation from a dental clinical workplace”,2007 International Conference of Industrial Hygiene and Occupational Medicine.
5.C.H. Lan, Y.J. Juang, C.Y. Peng, H.H. Liu, “Non-ionzing radiation measurement and biological hazard assessment with three wavelengths of UV germicidal lamps”, 2007 International Conference of Industrial Hygiene and Occupational Medicine.
6.H.H Liu, Y.C. Chien, Y.C. Lin, Y.J. Chang, D.T. Tang, C.P. Chang, C.Y. Chen,” Occupational health consultation for foundry industry – management of free silica hazards”,2006 International Conference of Industrial Hygiene and Occupational Medicine; p128
7.Y.C. Chien, H.H Liu, Y.C. Lin, D.T. Tang, C.P. Chang, C.Y. Chen, ”Occupational health consultation for medical equipment manufacturing industry – management of ethylene oxide hazards”, 2006 International Conference of Industrial Hygiene and Occupational Medicine; p127
8.H.H Liu, C.P. Chang, J.Y. Shieh, C.H. Lan, ”Exposure Monitoring and Biological Hazardous Assessment of Arc Welding Radiation”, 2006 International Conference of Industrial Hygiene and Occupational Medicine; p158
9.C.H. Lan. J.Y. Shieh, H.H Liu, T. S. Su. C.P. Chang, ”Investigation of Ultraviolet Exposure Assessment on Workplace”, 2005 Conference of Industrial Hygiene and Occupational Medicine,p214
10.M.H.Chung, H.H Liu, C. J. Chen, P.L.Lu, W.H.Wang, C.H.Chen, ”The Study of Physiological Fatigue in Frozen Food Workplace”, 2005 Conference of Industrial Hygiene and Occupational Medicine, p217
11.Y.C. Chien, C.C.Chen, C.P. Chang, Y.C. Lin, H.H Liu, C.S.Liao, J.H.Huang,,”Reporting of laboratory near-miss events in vocational high school-A trial”, 2005 Conference of Industrial Hygiene and Occupational Medicine ,p200
12.Chiu-Hui Tu, Y.-J. Huang, H. H. Liu, Cheng-Hsien Tsai, “Removal of Heavy Metal from Laboratory Wasteliquids by the Ferrite Process”,the 7th International Symposium on East Asian Resources Recycling Technology, Tainan, Taiwan, November 10-14, 2003.
13.Y. J. Juang, Y.C. Lin, Y. M. Sun, H. H. Liu , P.J.Tsai, ”Evaluating the stability and response time of a digital-controlled thermal exposure chamber designed for thermal hazard assessment”,2003 Conference of Industrial Hygiene and Occupational Medicine ,p323
14.H. H. Liu , C. J. Chen, C. J. Chen, Y. J. Juang, Y. M. Sun, D.R.Hsu, ”The physiological Fatigue of workers in the extremely low humidity workplace”, 2003 Conference of Industrial Hygiene and Occupational Medicine ,p323
15.Y. M. Sun, H. H. Liu, F. S. Juang, " Preparation of organic light-emitting polymers and study of film structures influence on luminescent characteristics", Photonics West, Optoelectronics 2000-Integrated Devices and Applications, C. A. San Jose, January 22-28, 2000.
16.孫逸民、劉宏信、莊侑哲,"電子構裝用難燃劑-磷酸酯之合成、混摻與難燃性之研究",中國化學工程學會88年度年會及國科會化工學門計畫成果發表會,p53-58(1999)
17.萘系新工程塑膠試產研究,第十二屆全國技術及職業教育研討會P.287-296(1997)


D.專書及專書論文:
1.莊侑哲、孫逸民、劉宏信、林宜長,物理性因子作業環境測定 :高立圖書有限公司
2.莊侑哲、孫逸民、劉宏信,作業環境測定實驗 :全威圖書有限公司
3.中油公司委辦國科會產業科技研究計劃成果報告:利用煤焦油中與環己烷為原料開發非光氣法  製備多環新穎高性能聚酯碳酸酯並進行其性能測試。(NSC88-CPC-E-273-001)(2000)


E.技術報告:
1.中油公司委辦國科會產業科技研究計劃成果報告:利用煤焦油中與環己烷為原料開發非光氣法  製備多環新穎高性能聚酯碳酸酯並進行其性能測試。(NSC88-CPC-E-273-001)(2000)


F.專利:
1.Y. M. Sun, H. H. Liu, F. S. Juang, “Synthesis and characteristics of novel phosphorus containing light-emitting polymers”, United States Patent.(2000)


二、研究計劃
1.利用煤焦油中奈與環己烷為原料開發非光氣法製備多環新穎高性能聚酯碳酸酯並進行其性能測試。(NSC88-CPC-E-273-001)
2.旋轉塗佈法製備P-OLED時材料結構-成膜厚度-元件光電特性三者之模式建立。(NSC89-2216-E273-001)
3.90學年度學校安全衛生輔導團
4.全國高中職校安全衛生教育訓練
5.溫濕度變化因子對勞工健康危害之研究—極低濕環境
6.91年度學校實驗、實習場所安全衛生及校園環境管理改善補助計畫
7.溫濕度變化因子對勞工健康危害之研究—低濕環境
8.市售防護眼鏡紅外線防護能力的研究
9.低溫肉品加工業之初探
10.紫外線工作場所危害之評估
11.92學年度學校實驗室、實習場所安全衛生補助、評鑑、督導計畫(大專組)
12.93學年度高中職學校實驗室、實習場所永續發展與安全衛生計畫
13.醫療器材製造業及鑄造業職業衛生輔導計畫
14.紅外線暴露劑量之即時偵測系統研究
15.不同濕度工作環境對作業人員生理及心理影響之探討
16.鑄造業紅外線暴露管理與評估
17.鑄造業職業衛生輔導計畫(二)
18.電磁場與紅外線量測方法建立
19.鑄造業職業衛生輔導計畫(三)
20.高科技行業製程與新興材料危害調查探討

21.電磁場(波)人體暴露量之量測方法及採樣先驅研究

22.98年度鑄造業職業衛生輔導改善與控制技術推廣宣導


三、研究方向
1.Exposure assessment of UV-VIS and IR hazard
2.Exposure Assessment of Reactive Oxygen Species of Dust Workplace
3.The affect of different humidity and temperature workplace to worker

4.Health effect assessment of work environment


四、專業表現
A.研究/專業獲獎:
1.國科會:不同濕度工作環境對作業人員生理及心理影響之探討 (10,000×12=120,000)
2.教育部:九十三學年度高中職學校實驗室、實習場所永續發展與安全衛生計畫 (10,000×12=120,000)
3.教育部:九十二學年度學校實驗室、實習場所安全衛生補助、評鑑、督導計畫(大專組)(10,000×12=120,000)
4.勞委會:鑄造業職業衛生輔導計畫(一) (二) (三) (10,000×10×3 =300,000)
5.勞委會:高科技行業製程與新興材料危害調查探討(12,000×8=96,000)

6.衛生署:電磁場(波)人體暴露量之量測方法及採樣先驅研究(10,000×8=80,000)

 

B.專業證照:
1.工研院與勞委會  危害通識執行委員訓練合格
2.甲種業務主管訓練合格
3.勞工安全衛生管理員結訓


C.擔任學位口試委員:
1.中國文化大學勞工研究所碩士   李長平
2.中山醫學大學護理研究所碩士   陳美珠
3.長榮大學職業安全衛生研究所   鍾美惠、陳嬿琦、鐘伊玲
4.弘光科技大學防災科技研究所   吳宜臻、陳怡如

5.高雄醫學大學職業安全衛生研究所   吳云臻  

6.弘光科技大學防災科技研究所   劉柏青、陳盈利


D.參與專業學會組織 :
1.中華民國職業衛生學會會員
2.中國勞工安全衛生管理學會會員


E.提供社會服務:
1.台南市政府環境保護防治基金委員
2.中華民國職業衛生學會秘書長、常務理事
3.中國勞工安全衛生管理學會顧問、技術發展委員會主任委員、理事
4.教育部九大院校實驗室安全衛生訪視委員、輔導委員
5.學校安全衛生輔導團 主持人及訪視委員
6.教育部全國高中職校安全衛生種子人員教育訓練講師及主持人
7.教育部高中職校實驗室安全衛生訪視委員、輔導委員
8.教育部技職院校校園實驗場所安全衛生訪視委員、輔導委員
9.教育部學校環境與安全衛生管理評鑑訪視委員
10.大專院校學校實驗室、實習場所安全衛生補助、評鑑、督導計畫主持人
11.教育部南區校園災害調查小組召集人、調查委員
12.教育部中區校園災害調查小組調查委員
13.勞委會高中職校安全衛生種子教師教育訓練講師
14.勞委會全國勞工安全衛生技能檢定資格審查委員
15.勞委會職訓局所屬職訓中心安全衛生輔導委員
16.國立中正大學環安中心安全衛生業務顧問
17.國立清華大學環安中心安全衛生業務顧問
18.勞委會中、南區ERC課程編撰、審查委員
19.台灣省政府勞工處安全衛生技術工廠檢查與輔導委員
20.行政院國科會台南科學園區甲、丙類危險性工作場所審查委員
21.行政院國科會中部科學園區甲類危險性工作場所審查委員
22.勞委會中區勞動檢查所甲類危險性工作場所審查委員
23.稻江科技暨管理學院校長遴選委員
24.勞委會委託辦理鑄造業輔導大同三峽廠、台中精機后里廠....等十五廠輔導委員
25.勞委會委託辦理醫療器材製造業輔導太平洋廠....等十廠輔導委員
26.衛生署國健局無菸職場輔導委員
27.衛生署國健局無菸餐廳輔導委員

 

:::

gotop